0..20mA to PWM

Converts any current loop signal (4..20mA or 0..20mA) to a PWM output. DIN rail mount included. Output current up to 8 amps at 12 or 24 volts DC (max. 200 Watts output). Input and output signal can be read out and controlled using integrated LCD display.

The PWM output can be used for

• dimming lights like LEDs, halogen bulbs., RGB LED strips both 12 and 24 volts.
• to control (hydraulic) valves or electric motors. 
• to read PWM duty cycle directly to a PLC input module.

Output signal can be:

• inverted (inverts input signal to output).
• gain adjust (e.g. 4mA equals 20% pwm and 20mA equals 80% PWM duty cycle).
• span adjust.
• filtered (to remove noise spikes from input signal).
• signal speed change (slow ramp / slow startup) to reduce impact speed of valves and motors.
• Selectable output frequency between 50hz to 30kHz (factory default set at 200Hz).

Thanks to the integrated LCD module, adjustments are easy and quick.

We are an R&D company and can make project specific adjustments if needed! Don’t hesitate to contact us.